Rack Slide End Cap Specificationsthe Rack Slide End Cap Is A White One-Inch Plastic Part Which Replaces The End Cap For Your Dishwasher Rack, Preventing Your Rack From Sliding Too Far. If You Find The Dish Rack Is Causing The Door To Not Close Properly, It May Be Due To The Part Being Worn Out Or Damaged. All You Need To Complete This Repair Is A Small Flat Blade Screw Driver. Simply Pop Out The Cap With A Smaller Flat-Blade Screwdriver And Snap The New One Into Place. If The Rear Cap Needs To Be Replaced You Will Need To Remove Both Front Caps And Slide The Rack Completely Off For Full Access. It Is Important To Note That This Part Is Sold Individually, And More Than One May Be Required, Depending On Your Repair. An Inexpensive Part, It Can Be A Good Idea To Purchase Several At A Time To Have On-Hand When Needed. This Part Fixes The Following Symptoms: This Part Fixes The Following Symptoms: Not Cleaning Dishes Properly | Door Latch Failure | Door Won’T Closethis Part Works With The Following Products: This Part Works With The Following Products: Dishwasher. This Part Works With The Following Products: This Part Works With The Following Products: General Electric, Hotpoint, Kenmore. Part, Wd12x10304 Replaces These: Part, Wd12x10304 Replaces These: Ap4484666,1556527,Wd12x0344,Wd12x10238,Wd12x344Cross Parts: Wd12x10238, Wd12x10304, 1556527, Wd12x0344, Wd12x344, Ap4484666